How to Patch A Large Hole in Drywall – In this article, I will take a complete look at how to repair large holes in drywall. Large holes in drywall can occur for many reasons, such as accidents or structural damage. Don’t worry, though, with a few proper steps and the right tools, you can repair these large holes easily.
Before getting started, make sure you have all the necessary equipment. Some of the tools you will need include a spatula knife, chicken wire, a new piece of drywall, a hammer, saw, drill bits, drywall screws, sand and drywall polish.
How to Patch A Large Hole in Drywall
The first step in repairing a large hole in drywall is to carefully clean the area around it. Make sure there are no debris or dust that will prevent the new material from sticking. Use a spatula blade to remove anything that might be around the hole.
After clearing the area, the next step is to create a rectangular shape in the drywall. Use a spatula knife to do this, make sure it is large enough to cover the entire hole. After that, cut the drywall to the dimensions you made and place it over the hole. Make sure it fits perfectly before proceeding to the next step.
The next step is to use the drywall piece as a guide to measure the size of the hole you need to cut. Use a chainsaw or drill bit to cut the hole. Make sure the size fits the drywall piece you just made.
Once the hole has been cut, the next step is to install the new piece in the hole using drywall screws. Install the screws at the edges of the holes, making sure the drywall pieces are secure. Repeat this step for the bottom of the hole, then for the top of the hole.
Once the new piece is in place, the next step is to fill the gaps around the hole with mud. Mud is a mixture of drywall and water that forms a porridge-like mixture that you can use to fill the gaps. Use a spatula blade to apply it evenly around the drywall cut and across the surface of the hole. Make sure you let the mud dry for the amount of time specified on the package.
Once the mud is completely dry, the next step is to sand the surface of the drywall. Use fine sandpaper to create a flat, smooth surface. Make sure you don’t apply too much pressure, as this could damage the surface of the drywall that has been repaired.
After sanding, the final step is to paint the surface of the repaired drywall. Make sure to choose paint that matches the color and texture of the original drywall so the results look uniform. Use a brush or paint roller to paint the surface evenly and let the paint dry completely before applying final touches.
Those are the steps needed to repair a large hole in drywall. It’s important to remember that this process requires time and patience. However, by carefully following the steps above, you can repair large holes in your drywall and have it looking like new again.